As summer fades and the cooler air of autumn arrives, it’s time to start thinking about closing your inground pool for the winter. Properly winterizing your pool not only protects it from damage due to freezing temperatures but also makes your spring opening much easier. Here’s a comprehensive guide to help you securely close your pool for the season.

Balance the Water Chemistry

About a week before you plan to close your pool, adjust the pH, alkalinity, and calcium hardness levels. This step is crucial to protect the pool surface and equipment during the winter. Ideal levels should be:

  • pH: 7.2 – 7.6
  • Alkalinity: 80 – 120 ppm
  • Calcium Hardness: 180 – 220 ppm

Clean the Pool

Remove any leaves, dirt, and debris from the water. Scrub the sides and bottom of the pool to prevent algae growth and stains. Ensure that the pool is as clean as possible to reduce the workload when it’s time to reopen.

Lower the Water Level

Lower the water level below the skimmer or according to the manufacturer’s recommendations for your specific pool type. This step is important to prevent water from entering the skimmer line and freezing.

Add Winterizing Chemicals

Add winterizing chemicals to help keep the water clear and free from algae during the off-season. These typically include an algaecide and a winterizing pool shock. Follow the manufacturer’s directions for the correct amounts based on your pool’s volume.

Circulate the Chemicals

Run the pool’s pump for at least 24 hours to circulate the new chemicals thoroughly. This ensures that the chemicals are evenly distributed throughout the pool.

Drain and Store the Equipment

Drain all pumping, filtering, heating, and chlorinating equipment. This includes hoses, pumps, filters, heaters, and chemical feeders. Dry and store them in a dry place to prevent any damage during the winter.

Blow Out the Lines

To prevent freezing and cracking, blow out the water from the plumbing lines using a compressor or shop vac. Seal the lines using expansion plugs or other appropriate methods to keep water out.

Cover Your Pool

Install a quality winter pool cover to keep out debris and reduce the possibility of algae growth. Make sure the cover fits securely and is weighted down or tightly sealed around the edges to prevent it from blowing away or allowing debris to enter.

Regular Checks

Throughout the winter, periodically check on your pool cover and the area around the pool. Remove any accumulated water or snow from the top of the cover to prevent stretching or damage. Also, ensure that the cover remains secure and adjust if necessary.

Closing your inground pool for the winter is an essential maintenance step that can prevent costly repairs and ensure your pool remains in good condition when spring arrives. By following these steps, you can rest assured that your pool will be well-protected against the harsh winter elements. Remember, taking the time to close your pool properly can save a significant amount of time and effort when it’s time to dive back in the following summer.

If you’re considering restoration work for your inground pool, now is good time to plan! Contact the experts at Pound Pool Plastering today!

Pound Pool Plastering services residential and commercial pools in applying a wide variety of pool plaster finishes and complete renovations. We offer Diamond Brite, Sunstone, Hydrazzo, and Marcite – and a great selection of tile choices and coping stones. Owner Dale Pound personally oversees each pool project to ensure the highest quality is delivered. Call or email us for a free estimate.

Written by the digital marketing team at Creative Programs & Systems: www.cpsmi.com

Leave a Reply