An aluminum residential fence is a galvanized fence system with a hard wearing powder coat finish. An aluminum residential fence is designed to add value to residential homes. A selection of styles and colors are available to complement any home and landscape environment. Aluminum fence is engineered for residential, commercial, and industrial purposes. Quality aluminum fences provide the level of quality and resilience consumers expect out.
Several companies offer aluminum residential fencing online. One of the benefits that is received from choosing aluminum is that the panels have a powder coat finish that has been specially formulated for durability, with ultra-violet inhibitors to endure the elements. This installment will serve as an installation guide.
Check Neighborhood Rules and Regulations
It’s better to check neighborhood rules and local regulations before ordering and installing your new aluminum fence. It is crucial that you make sure if you are allowed to install the type of fencing you are looking at otherwise you will be throwing money away. If you build one without considering the rules it is likely you will be required to dismantle it. If in any case you are told that you do need a permit to install a fence ignore that advice! It’s better to get one before starting any construction process to avoid hiccups down the road.
Decide the Location
When you have checked the rules and regulations and obtained the necessary permits the preparation for the installation of the fence can begin. You have to ascertain your corner and end stakes locations first since they make the foundation of the entire layout and have to be predetermined. Mark out the fence with wooden stakes and run a string along them to mark the line of the fence. You can then show the end post positions and “on center” corner. Then pinpoint your intermediate postings.
Dig Holes
The holes for the fence posts should be dug to 24 inches by 18 inches round holes. Gate posts must be set in larger and deeper footings because they are subjected to great force on a regular basis.
Place Your Posts
Place your posts into their holes, one after the other. Then place an aluminum fence panel on the ground between every two posts as you move along,. This will help you to make sure that the posts are set at the proper interval. If your panels are not available yet find a piece of wood that is the same size as they will be and use that as a guide to help in visualizing the correct fit.
When placing your posts, use fast-setting concrete to fill up the hole to about 4″ below the edge. This will provide adequate space to spread dirt on the concrete and cover it up later. Use a magnetic spirit level to measure and level all the posts.
Check The Installed Posts
Go back to your previously installed posts to check that they are plumb and level. Straighten them if necessary before the concrete is completely set. Repeat this all the time so that the concrete does not set with posts that are neither plumb nor level.
Install Aluminum Fence Panels
When the concrete is set and dry, put the aluminum panels one after the other. This process is quick because installation only requires the nuts, screws, and bolts that fencing company provides. At this stage, you will be able to see the form and shape of your aluminum fence. When all parts of the aluminum fence are installed, install the aluminum fence gates to completely surround your home; after which you can invite your friends over to admire your new aluminum fence!
Learn more about iFenceUSA and their vast line of custom aluminum fencing options with various grades of aluminum fence to choose from including: Commercial Grade Aluminum Fencing, Residential Grade Aluminum Fencing, Pool Grade Aluminum Fencing, and Industrial Aluminum Fencing at www.ifenceusa.com. To contact one of our aluminum fence experts call toll free 800.762.2907 or via email at info@ifenceusa.com.