Posted on by admin

How to use Bus Ducts & Plugs in an Industrial Setting

During the construction of commercial buildings or factories, there are many things to consider.  The most important one is wiring and distribution of electricity. The contractors have to assure that electricity is equally distributed in the area so that every machine and room will get equal voltage for the best performance.

There are two ways used to distribute the wiring. The first one is using the strips and bars to attach the wires to the walls and keep them organized. It might be good for the small companies but it causes issues in proper distribution of wiring. That is why bus ducts are the perfect solution and here is how you can use the system.

Distribute the wiring

One of the biggest benefits of using bus ducts is that you can easily distribute the wiring in the industrial setting. The wires will be evenly distributed and you will not have to worry about the shortage of wire in any room. You will not have to buy extra wires because you will get the perfect estimation of the length of wire you require.

Improve performance

The bus ducts will help you to enhance the performance of the overall commercial building. It will prevent the short circuit and the uneven distribution of the voltage because the high-tech plugs have been developed with special breakers and inspections systems. It means that you will never have to worry about the shortage of electricity or sudden loss of voltage.

Economical means of using more electricity

The best thing about the bus plugs is that that they are very cost-effective.

  • You might have to invest a huge amount while buying the plugs but once they are installed you will not have to worry about the worrying system ever again.
  • It is a one-time investment that will serve you for a long time.
  • You will be able to use more electricity as well as you can save a decent amount on the electricity bills.

Technical transformation

Bus plugs will technically transform the industrial setting. If you want to add more wiring to the office you can connect them with your bus ducts and enhance the coverage that it is providing in the commercial building.

Protective coverage

In case your industrial setting is in the humid area where rainfall is common you will have to suffer from the moisture in the walls and ceiling. It means that when the water reaches wires it might cause issues. However, the bus ducts and bus plugs will provide the perfect protective covering to the wires and their joints.

Bottom line

There are several types of bus plugs and ducts available in the market. Make sure that you buy the quality items so they will serve you for a long time. Compare the features and rates of different products available in the market. It will give you the perfect idea that which item is the best for you.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at https://www.jpelectricalcompany.com/products.php.  To contact one of our product reconditioning specialists call 877.844.5514 today.

Posted on by admin

How to Select the Best Circuit Breaker for the Commercial Building

A circuit breaker is a specially designed switch that will protect the wiring of the house or the commercial buildings during short circuit or overload. It will automatically detect if there are any faults in the electricity distribution and will stop the flow of current.

There are different types of fuses available in the market. All of them have unique specification and features that selection of the best one can get really tough. Here are a few things you have to consider to assure that you have selected the right thing.

Voltage

The voltage of the panel switch is calculated with the help of the highest amount of voltage that can be distributed across all the end ports. You must beware of the distribution types and the direct integration of the circuit breaker into the system. To meet the end application, it is important that you select the circuit breaker with the required voltage capacity.

Frequency

The most common types of circuit breaker have almost 600 amps and it can operate the frequency of 50 to 120 Hz. You will have to reduce the power rating of the breaker if you want the frequency to be higher than that. Pay attention towards the requirements of appliances that you will be using in the commercial building to assure that your circuit breaker will match their frequency.

Maximum interrupting capacity

It is regarded as the highest amount of the fault current that the breaker can stop. You have to assure that the interrupting capacity of the circuit breaker is slightly less than what the appliances can tolerate. It will enhance the life of the electrical products because they will not have to suffer the extra voltage and the damages that come with it.

Technologies

With the advancement in technologies, many innovations have been introduced in the circuit breakers. Here are some of the most commonly used and famous technologies available that you can select from:

  • Thermal
  • Thermal magnetic
  • Magnetic
  • Magnetic hydraulic
  • Electronic
Operating conditions

One of the most important things that you have to consider regarding the circuit breaker is the operating conditions listed on the item. There are certain temperatures and voltages that have been mentioned. Remember that the circuit breakers are manufactured under strict environment and the conditions mentioned on them might not match our atmosphere. So you have to be very careful regarding the circuit breaker and fuses that you are selecting for your commercial building or machinery.

Bottom line

The installation of the panel switch is not an easy task. There are certain points in the building where they can be installed and only the experts will know. It is important that you hire the professionals and get their advice during the selection of the fuses because they will give you the best idea. Select the product that will meet your requirements and your budget. The high-tech and latest items will be more durable and competitive as compared to the old items.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at https://www.jpelectricalcompany.com/products.php.  To contact one of our product reconditioning specialists call 877.844.5514 today.