Part of owning a water softener is maintaining it. One aspect of water softener maintenance involves cleaning the tank which holds the brine. Cleaning a water softener tank should be done every five to ten years. It is time to clean the tank when your water turns hard and the basic tank maintenance doesn’t fix the issue. Older water softening units can benefit from annual cleanings especially electric water softeners.
The first step in cleaning the water softener tank involves emptying the tank. This is done by locating the bypass valve and shutting off the water intake. Water can be siphoned out of the tank. After this process is completed you will want to remove the leftover salt and safely throw it away. Water softener salt must be disposed of away from plants. Water softener salt will kill plants and other landscaping plants and shrubs. Another way to get rid of large blocks of salt or bridges is to dissolve it in hot water.
Once the water and salt have been removed from the tank
homeowners should remove the brine grid that sits at the base of the tank. Some water softening units have a mesh
platform instead. Set this grid to the
side before cleaning the tank.
Once the water softener tank is empty and the brine grid or
mesh has been removed it is time to clean the tank with a good amount of soap
and water. This mixture should be
scrubbed all around the interior of the tank with a long-handled scrub
brush. After the tanks has been
thoroughly cleansed the soapy water can be dumped out and rinsed with clean
water.
After this has been done the homeowner should clean the tank with a combination of bleach and water. Stir the bleach/water combination in the tank and let it sit for fifteen minutes to completely disinfect the tank. Organisms have a difficult time to grow in the concentrated brine however the bleach and water mixture makes sure.
Once this process has been completed and the bleach/water combination has been rinsed out it is time to replenish the tank with water and salt. First replace the grid into the bottom of the tank. Add water softener saltand water back into the tank when it is back in place. Give the tank a couple of hours before you regenerate the water softener as this time is needed in order to dissolve the salt within the tank.
The experts at Reynolds Water Conditioning have a solution
to your homes unique water quality needs including: arsenic, bacteria,
chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins,
radon, and more. More information on our
water treatment solutions including water softeners and conditioners, water
filtration and purification, reverse osmosis drinking water, and iron &
odor removal can be found online at https://reynoldswater.com.
Hard water is known to contain higher than normal levels of calcium and magnesium. This causes issues with lime scale build up that interferes with household and daily functions. Issues range from clogged plumbing to soap’s ability to clean properly. For most homeowners the installation of a water softener system is vital in bringing higher quality water to the household. Most water softening units will continue to function for years with little maintenance. Regular check ups and cleaning does help to improve their lifespan.
One important aspect in maintaining your water softening equipment is caring for the systems brine tank. In order to properly maintain the tank, the salt levels should be checked and if low replaced on a monthly basis. Salt is essential in the ion exchange process that takes place in water softeners. As the system regenerates the hard water will flow through resin in the softener and the hard ions trade place with the soft ions on the resin beads. This creates soft water.
Your specific softener should come with a manual that
instructs you on the perfect level for the salt in your brine tank. Generally, the tank should be kept half way
full and three inches above the water level.
High levels of salt can improve the overall efficiency however should be
reduced is the salt sticks to the sides of the unit. If salt is allowed to build up in the brine
tank users should carefully separate the salt to avoid thick bridges from
forming.
It is also important that you put the proper water softener salt into the brine tank. The manual should explain if your system best operates using granular, tablet, or block salt. Granular is the most common as it easily dissolves. On top of different types of salt there are grade variances as well.
Water Softener Rock Salt: This is a cheaper
source of softener salt and therefore contains more impurities. These impurities often decrease the
efficiency of the softener, dirties the tank, and requires more regular
cleaning and maintenance than other salt grades.
Water Softener Solar Salt: This option is purer
than rock salt. For most water softeners
this salt option is chosen by homeowners
Water Softener Evaporated Salt: This option is
the highest quality grade of water softener salt that can be purchased. It is also the most expensive.
If a salt bridge occurs, it is important that it is broken up and not allowed to “build up”. A solid layer of brine known as a bridge occurs when the salt in the brine tank binds together preventing loose salt on top from mixing with the water below the bridge. This of course prevents the softener from properly functioning. These bridges can be broken up using a large broom handle and tapping it around the tank several times. If the layers are not easily broken with a long handle a homeowner can pour hot water over the bridge. If bridges become a common issue in your water treatment systemyou can try using less softener salt which would allow the salt to drop between refills. Cleaning out the brine tank also helps.
Another common issue with salt inside of brine tanks is that
the salt can become a mushy pile at the base of the tank. This causes the water to rise around the salt
instead of mixing in with it. A large
broom handle can be used to break up the mush mound. Mush should be scooped out, dissolved in a
bucket of hot water, and then poured back into the water softener tank.
The experts at Reynolds Water Conditioning have a solution
to your homes unique water quality needs including: arsenic, bacteria,
chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins,
radon, and more. More information on our
water treatment solutions including water softeners and conditioners, water
filtration and purification, reverse osmosis drinking water, and iron &
odor removal can be found online at https://reynoldswater.com.
There are a number of signs that point to a problem with hard water. Homeowners with hard drinking water will often notice a smell or taste that is off. When hard water is present in your home often times the sinks, tubs, and toilets will be stained, family members may begin to complain of dry, itchy skin, and your water supply will smell and taste off. Bringing in a sample of the homes water will allow you to know exactly what is going on in your water supply. This water analysis will tell you what type of water treatment system will best suit your homes water issue.
Water softeners are used to remove excess calcium and magnesium ions and exchange them with either sodium or potassium ions, depending on if you choose a salt free water softener or water softener that uses salt. When the exchange has taken place the water softener regenerates and flushes the system of extra ions until it has been completely recharged with new sodium or potassium ions. This process uses twenty-five gallons of water each day, depending on use. It is important to determine the waters hardness. Preventing the buildup of scale can increase the lifespan of your appliances like your water heaters, dishwasher, and more. There are seven common signs that your home will benefit from the installation of a whole house water softener.
Noticeable Scale
Buildup on Appliances
If you are noticing scale, you more likely than not have
hard water. Noticeable scale build up
will be seen in the form of mineral deposits on coffee pots, tea kettles, and
such. These same mineral deposits are
being built up within your homes pipes as well.
To prevent clogged pipes and less effective passing of water through
your system causing defective plumbing and increased scale buildup a water
softener should be installed. The water
softener needs to be set in a manner that allows the proper amount of water to
rejuvenate each day to avoid running out of soft water throughout the day. If you use twenty-five gallons of water each
day, then your water softener needs to supply twenty-five gallons of soft
water.
The visible buildup that homeowners are seeing is known as limescale. This is a hard, chalky material that is formed from a combination of calcium and magnesium bicarbonate. The salt is what forms the white chalk like substance that is visible. A water softener will reduce this scale buildup through ion exchange technology.
Itchy, Dry Skin and
Hair
Hard water contains more calcium and magnesium salt than
soft water. When hard water is used in
daily life it can cause your skin and hair to dry out no matter what shampoo
and lotion you are using. The hard water
is not providing any nourishment to your skin and hair, so it dries out. The extra minerals, calcium and magnesium,
remain on your skin. It is important to note that soap doesn’t dissolve well in
hard water, so it doesn’t help to remove the build up of minerals. Since soap doesn’t dissolve well either that
residue is also known to irritate the area as well.
Hard water is also harsh on even the most stringent of skin care regimens. Hard water blocks the pores in your skin, causes inflammation, and creates an environment prone to black heads. Leathery, dry skin is another common side effect of hard water.
Gray and Faded Clothes
When darker clothes, sheets, and towels start to fade and
gray when washed using hard water. The hard water may also change the texture
of the fabrics. The fabrics will start
to become scratchy overtime because of the additional minerals that are
contained in hard water.
Sinks, Bathtubs, and
Toilet Stains
Often times when a home has hard water it is noticeable
because of the stains that the mineral residue leaves behind in sinks, tubs,
and toilets. The stains are formed
after water evaporates and leaves behind the large amounts of calcium and
magnesium from the tap water. The
residue will feel plaster like. These
deposits can also form on faucets.
One way in which to remove the residue build up is with
vinegar. Put vinegar into a spray bottle
and spray the buildup or residue with vinegar.
After letting it set for a minute it should wipe away without a ton of
struggle. For harder to remove residue
let the vinegar soak for up to an hour.
To clean the residue buildup from your dishwasher, pour a cup of bleach
into the dishwasher along with a cup of powdered detergent. Run this mixture through an empty
dishwasher. After the cycle has finished
up run the dishwasher once again with an empty load using a cup of vinegar. This will help to ensure that the bleach is no
longer present.
Both types of water softeners, salt and potassium chloride, are effective in softening your homes water to prevent future residue buildup from making a home in your home. To determine your homes water softener needs, have the water in your home tested. This water analysis will help to determine the level of extra minerals in the water and the settings that will be optimal once your water softener is installed.
Constant Plumbing
Repairs
The plumbing in your home, especially steel pipes, are
easily harmed from the buildup of limescale which will prevent the water from
flowing freely through them. PVC and
Copper piping tend prevent the buildup of hard water minerals better than steel
however, all plumbing will eventually be affected by limescale. More limescale means thicker buildup in the
plumbing and will eventually lead to the loss of water pressure. The rate at which the pipes are affected will
be quicker overtime as the space within the pipe circumference shrinks due to
the additional limescale.
If left untreated the pipes will eventually fail. Homeowners that don’t take regular care to clean up the build up from around faucets will eventually end up with valves that don’t fully shut and therefore leak. This leak will lead to greater, faster limescale buildup. Plumbing repairs can be expensive as well as causing a lot of excessive wear on the house. Installing an appropriate water softening unit will work wonders in helping to prevent further plumbing issues.
Increases in Water
Bills
The amount of water that you use will increase the harder pipes have to work to get the water to flow through. If there is a sudden increase in your water bill have your water tested. This analysis will determine if you need a water softener installed, need your water softener replaced, or the water hardness level of a currently installed system needs to be adjusted.
If you notice a change in your water the first step should always be to have your water analyzed by a professional. Once an analysis is done on your water and you know what minerals are contained in the water a water treatment solution can be recommended. Sometimes the simple installation of a water softener can improve the overall quality of your homes water however sometimes the solution is more complex. A wide range of water treatment systems are available from whole house to point of use water softeners, water filters and purifiers, and reverse osmosis systems, all with their own specific job.
The experts at Reynolds Water Conditioning have a solution
to your homes unique water quality needs including: arsenic, bacteria,
chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins,
radon, and more. More information on our
water treatment solutions including water softeners and conditioners, water
filtration and purification, reverse osmosis drinking water, and iron &
odor removal can be found online at https://reynoldswater.com.
There are both advantages and disadvantages to the two types of water softeners commonly purchased: potassium chloride (salt-free) and salt water softeners. The choice if often based on the area in which you live, the quality of your homes water, and health concerns that may or may not exist.
It is important to note that although we refer to potassium chloride, salt-free units as water softeners they are technically not water softeners at all and instead water conditioners or descalers. Systems that use potassium chloride over salt are known to reduce the build up of limescale. Limescale is the chalk like substance that leaves dried up hard water spots on faucets, glass wear, and such. Water conditioning systemsalter the chemical make up of the waters minerals through a descaling process. Solids are then prevented from depositing within pipes and other water-using fixtures.
So, is a salt-free water conditioner beneficial over a traditional water softener that uses a salt ion exchange process to remove the minerals from your homes water? One of the nicest things that come along with salt-free water systems is that they don’t waste water in the same manner as traditional water softeners. Salt-free water softeners/conditioners are less expensive to operate and require less maintenance. Water that has been conditioned isn’t slippery like water coming from a water softener can. One concern with a potassium chloride system is that they are not as effective as water softeners when it comes to improving the water in places where water sits in place, such as a water heater. These areas can still have issues where limestone builds up.
How well a salt-free water softener will work to improve the quality of your homes water will depending on the minerals and contaminants in your water. Some areas saltless water softeners/conditioners don’t work as well as others due to the hardness of the water. It is important to have your homes water properly analyzed to see exactly what you are dealing with before purchasing a unit for your home.
When water softeners are utilized it has been proven that they extend the lifetime of appliances that require water. Water softeners are good for your plumbing, water heaters, shower heads all while using less soap in laundry, dishes, and baths.
In order to ensure that you are purchasing the right system for your families need it is crucial that youspeak with professional at Reynolds Water Conditioning and have them test your water. It is up to you to know the difference between products that will work for your water situation and work with an expert to find a system that will offer you the benefits of quality water, longer lasting appliances, and more efficient soap usage.
The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more. More information on our water treatment solutions including water softeners and conditioners, water filtration and purification, reverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.
Water softeners take bathing to an all new level, especially after accepting and coming accustomed to hard water showers. If you are ready to bathe in silky smooth water, if you are excited for clear uncolored, smell free water, and if you are anxious to stop cleaning with harsh rust removers, we might just have the perfection solution for you.
Choosing a water softener, often misspelled as “water softner”, we can help with options ranging from traditional household water softeners, salt-free water softeners, dual- tank softeners and combinations that include reverse osmosis, whole house filters, arsenic removal and more.
Issues With Hard Water
Water softeners solve the problem of hard water. When your homes water is filled with extra minerals such as calcium, magnesium carbonate or manganese it is considered hard. Some homeowners note that soap doesn’t lather correctly, their dishes are spotted, sinks and tubs have rings, bright colored laundry looks dingy, skin feels rough, and other annoying side effects. An analysis of your homes water is the only way to truly “diagnosis” your homes water and determine if a water softener is truly the right solution. These extra minerals don’t normally pose a risk to your overall health however, not treating hard water can cause issues with your homes plumbing, water heating system, appliances, and such. In research done by the U.S. Geological Survey over eighty five percent of American homes have problems with hard water in their homes.
As previously mentioned, one way to get rid of hard water is to install a water softener. The water from your home is not considered hard unless it contains more than 1 GPG of dissolved hard materials however, water with up to 3.5 GPG is considered soft. Noticeably hard water contains upward of 3.5 GPG with 10.5 GPG being considered extremely hard. Anything between the two extremes is considered moderately hard and should be properly treated.
Damage To Home From Hard Water
Hard water is more annoying and expense than a risk to the health of you and your family. In fact, many issues that are created because of a home’s hard water supply stay hidden until an actual malfunction in the plumbing or your appliances bring it to light. Scale can cake on to the inside of your plumbing, water heaters, and appliances causing major issues for you. This on top of the issues that are general nuisances in the everyday running of your household.
One of the most common fixes for hard water is the installation of a water softener. There are a variety of water softeners that people can install in their homes or businesses to improve the quality of your water. The most common whole-house water softener that is installed is known as a salt ion-exchange water softener. Salt ion-exchange water softeners have two tanks. One of the tanks is filled with brine and the other special resin beads. The water becomes soft by exchanging salt ion for hard minerals.
Another option is a salt-free water softener that operates in a similar manner as a salt ion-exchange water softener however uses potassium-chloride instead of softener salt. Hard minerals are not reduced but instead prevent the minerals from being deposited as scale to plumbing and such.
Dual-tank water softeners are yet another option. Unlike typical water softeners that disconnect from the water system when recharging making them basically out of commission during the process, dual water tanks always have on tank in use while the other regenerates. Thus, no downtime in water usage. For most families the water softening rejuvenation process in common water softeners takes place at night when water is most often not in use, for big families or families with varying schedules a dual water softener can be a better fit.
The Right Size Water Softener
Water softeners come in a variety of different sizes, the size of the softener you need for your household will depend on the size of your home and the number of people using water in your household. It is important that when purchasing a new water softener, you select one that is the right size to handle the demands of your home and family. Remember the physical size of the unit is not particularly important, it is the systems ability to remove minerals from the water at a pace that keeps up with your needs. This can be determined when the water from your home is analyzed.
Along with choosing the right size water softener for your home it is important to choose a softener with features and controls that are necessary. It is important for homeowners to know what controls the regeneration cycle, how long each regeneration cycle takes, as well as the amount of water and salt needed for recharging. Softeners use two different control options: automatic timing and demand-initiated regeneration no matter what option is on your softener, the salt needs to be monitored on a regular basis to prevent running low.
The professionals at Reynolds Water Conditioning can help you select and install the best option in water softener for your family.
The experts at Reynolds Water Conditioning have a solution to your homes unique water quality needs including: arsenic, bacteria, chlorine, rotten egg smell, fluoride, hard water, iron, lead, acid, tannins, radon, and more. More information on our water treatment solutions including water softeners and conditioners, water filtration and purification, reverse osmosis drinking water, and iron & odor removal can be found online at https://reynoldswater.com.
All you want to do on a really hot day or after a long, hard workout is to go over to your kitchen sink and fill an extremely large glass with cold tap water! However, is the water that is coming out of your tap safe to drink?
While tap water in the United States is safer to drink than some of the tap water found in other parts of the world, it can still be full of contaminants like minerals and chlorine. Small amounts of minerals won’t do too much harm to your health and you won’t even know that they are there, but you may be able to taste and smell the chlorine that is present if you have public water. Of course, well water won’t have any chlorine in it, but it can be full of calcium, magnesium, and other minerals.
Installing a Water Conditioner
To improve your tap water, and make it better for you, as well as better tasting, you may want to consider installing one of the numerous water conditioners that are available. Most water conditioners utilize sodium ions to replace the calcium and magnesium ions in the water. The sodium ions will make the water softer, which will make it taste better and it will even help keep your pipes and fixtures in working order for much longer. The water conditioners will also remove other minerals from your water.
How Much Salt Consumption?
You may be concerned about how much sodium you will be ingesting with each glass of water that you drink after it has been through your water conditioning system. Well, to ease your fears a little, let us tell you that a normal glass of water normally contains very little sodium. Now, this number does rise to twelve and a half milligrams for the same glass of water after it has gone through the water conditioning process, but that is still considered very low sodium content.
That means that the only reason why you may want to reconsider drinking the water out of your tap after it has gone through a water conditioner, is if you are required to keep a very low sodium diet. While the number is quite low for sodium content, it could be enough to make you go over your daily limits too easily. A quick fix to that is to try to consume as little sodium as possible in everything else that you eat and drink.
Having Your Water Tested
If you have been wondering if your tap water is safe to drink, you may want to consider having it tested to see what is in the water. You may be surprised to find out that the water that you have been drinking all these years is as safe as you thought it was, or you may find that you should have installed a water conditioning system long ago to make your water safer than it is.
At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need. We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help! For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.
Do you notice a build-up of scum in your shower or dishwasher? Is your home’s shower not supplying you with water that feels “right” as you rinse off the day? If you are encountering issues or experiencing a change in your water supply, it may be so to hard water or that the treatment option that you are currently using for your homes water is not the right one.
One of the most common solutions to treat a hard water supply is with a water softener or conditioner. In this installment, we shall briefly discuss the problem of hard water, how water softener systems and water conditioner work, and the difference between both.
Problems with Hard Water
Hard water is caused by the presence of too many metals or minerals in the water, such as magnesium, calcium, and others. These minerals dissolve into your household water through the dissolution of the surrounding soil and rock. Water hardness is calculated in milligrams per liter (mg/L) or grains per gallon (GPG). If your water tests 1 GPG or less, then you have soft water.
Hard water does not flow easily through because of the build-up of scale which accumulates inside your water pipes, heater or other appliances. In extreme cases, hard water can clog up water pipes and stop the flow of water all together. Hard water also influences household appliances and everyday activities. For instance, hard water reduces soap lathering, causing the water to become sticky and scum-like inside of lather.
How Water Softening Works
If you have a problem with hard water in your home, one of the best solutions is to install a water softener. Of course, it is important to speak with a professional who will test your homes water to see if this is the right option for your family. A water softener reacts with the calcium and magnesium ions and replaces them with sodium ion which results in a softer water. The added sodium is well below the FDA standard which makes the water fit for life.
The ion replacement is done in a tank filled with resin. The beads are negatively charged and attract the sodium ions which are positively charged. Once water flows across these beads, magnesium, and calcium ions are replaced with sodium ions.
Once the softening is completed, there is a need to recycle the beads in sodium chloride solution (water softening salt). This solution will remove the magnesium and calcium ions attracted to the beads and replace them with sodium. This bead can then be used for further softening session.
Choosing a Water Softener or Conditioner?
The term water softener and water conditioner are often used interchangeably. However, there is a huge difference between the two appliances.
Water conditioners remove chlorine, sediments, chemicals, and other foreign materials while treating water hardness while water softener system does not treat water for any other reason other than hardness. Of course, both appliances are used to treat water hardness, but the results are always different.
Water conditioner system processes water through a process that prevents scales. This causes a slight drop in the water pressure and causes the hardness-causing minerals to be suspended for three days. Usually, a catalyst in form of a magnetic field is used to enhance the process. In the end, the system displaces bad tastes, minerals, and prevents bacterial growth. Although the water is not technically soft, it still possesses the properties of a soft water. This means that the water will not precipitate and will lather easily with soap.
At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need. We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help! For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.
Before we discuss water softeners, it’s essential that one gains an understanding of what hard water is and how it affects you and your family. Hard water refers to water with a higher-than-usual mineral content. This is typically the case with water that is extracted from areas with large deposits of calcium and magnesium carbonates (naturally occurring in areas with limestone and chalk). While it can be argued that hard water does have some health benefits for humans, it can also pose some serious problems to homes and industry found in these areas.
Recognizing Hard Water
Here are a few ways you can recognize the presence of hard water:
If your water fails to foam or lather up when exposed to soap, you most likely have hard water.
Hard water is also responsible for corroding metal. This will show in faucets and sinks that are not covered with an anti-corrosive coating. Other equipment exposed to this water may also begin to corrode over time.
If used to fill a swimming pool, it manifests a “milky” cloud in the water. This occurs when the calcium in the water reacts with the carbon dioxide present in the air.
Softening Hard Water
Hard water can be “softened” using a water softener. Water softening is the chemical process of removing calcium and magnesium (among other metals) from the water. The end result is water that responds well to soap and which has little or no corrosive effect on metals. Water softening is thus a good idea especially in residential and business buildings because there will be less corrosion in the plumbing system and other critical equipment.
If you suspect you have hard water, then you may want to consider purchasing and installing a water softening system. A quick search online will yield high-quality, local, water softener installation and repair companies. Some are costlier than others depending on the features and capacity. Sometimes they’re known as water purification systems, water conditioners, orwater filtration.
For residential homes, water softeners can be installed as a complete system costing thousands of dollars or a point of use filter which has a lower capacity and can be more affordable.
At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need. We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help! For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.
A salt-free water softener uses potassium chloride instead of salt, so you will not experience salty water, or the salt build up that can occur inside the tank of your water softener. There are many other positive benefits of using a potassium chloride water softener, but you will only see them if you maintain it properly.
One of the things that you will need to keep track of is how much potassium chloride you have inside your brine tank. The potassium chloride should be at least three inches above the water line at all times, although you may find that you can keep less in there if you find a residue on the sides. It is a good idea to check your levels every couple of weeks at first, until you know how much potassium chloride you are using.
Your valves are a necessary component of your potassium chloride water softener, and you will want to turn them from one position to the other and back again once a month. This will ensure that they will turn easily when you need to cut off the water supply to your softener. This is also the time to clean the valve between the brine tank and the resin tank. To clean that valve, you will need to disassemble it first, but make sure that you relieve the water pressure before taking anything apart. If you notice that any of these valves are leaking, this would be the best time to replace the washers or seals.
The resin in your potassium chloride water softener is what helps soften your water, and you will want to keep it functioning properly. A water softener cleaner can be added every few months prior to a regeneration to keep the resin in optimal form.
New potassium chloride softeners do not need to be cleaned often, but they can benefit from an annual cleaning and so can your homes water. To clean your potassium chloride water softener, you will need to close off the water intake and take all the water out of the tank. Then you will remove all the potassium chloride and scrub the inside of the brine tank with hot soapy water. After the tank has been thoroughly rinsed out, you should sanitize the tank with a mixture of water and bleach.
Keeping this maintenance schedule will allow your potassium chloride water softener to continue working for many years, as it provides you with softer water.
At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need. We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help! For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.
No matter where your homes water comes from, a well, a spring, or the city, problems can exist. Individual water quality issues are fixed with distinct water treatment solutions. It is our job to help determine what solution will work best in treating and eliminating your homes water issue. From hardness to foul smells, we have a solution to bring you high quality water throughout your home. There are several issues that are commonly found in water throughout Michigan homes.
Common issues with your waters quality:
Hardness
Foul Odors and Taste
Mineral Buildup
Acidic
Arsenic
Hard Water:
Most often homeowners don’t know that they have hard water. What they do know is that there are spots on their glassware, laundry appears dingy, increased usage of soap, change in the texture of hair and skin, increased energy costs, and scale build up on faucets and such. Homes affected by a hard water supply have plumbing that tends to age quicker than those who seek to soften the water. The most common way to treat hard water in your homes water supply is with the installation of a high-quality water softener.
Foul Odors and Taste:
Foul odors and strange tasting water is something extremely noticeable to homeowners. Water can taste unpleasant metallic, chlorine, or can smell awful like rotten eggs, when this occurs one of the most common treatment options that is suggested is using an activated carbon filtration system. Backwashing carbon filtration systems are a combination of a large filter filled with activated carbon media. This removes foul tastes and odors from your whole house water supply leaving you with high quality water throughout the home.
Mineral Buildup:
Homeowners may not notice that they have an accumulation of minerals taking place within their water supply. The most common symptoms of a build up of iron and magnesium include unpleasant metal taste, staining, reddish tinted water, odors, and rust particles in the water. The treatment for a mineral buildup is the installation and usage of an iron filter system.
Acidic:
When the porcelain surfaces start to turn from white and ivory to green and blue green there is an issue with acidic water, low ph within the water. What this means is that your water supply has acid in it which is causing a corrosion of your pipes and plumbing fixtures. The fix for the issue of acidic water is with an acid neutralizer using Calcite.
Arsenic:
Arsenic is an element found naturally within ground water. Arsenic within your homes water supply can cause adverse health effects even in low concentrations as it is a carcinogen at high concentrations. In order to remove arsenic from your water supply homeowners should install an arsenic reduction system.
All water supplies need to be treated on an individual basis as symptoms can also be masked by other occurrences within the water supply. Free water analysis is done to diagnosis the issues that are found within your homes water to ensure that the treatment options is specific for your water needs.
At Reynolds Water Conditioning Company, we are here to help make sure our clients don’t buy water treatment systems that they don’t need. We are here to make sure you find a water softening system that gives you the results you are looking for, whether it is to remove iron or odor from you water; we have a solution that will help! For more information contact our experts at 800.572.9575 or at our website https://reynoldswater.com.
